Helium Leak Testing

Axenics specializes in providing helium leak testing for the purpose of identifying and locating even the smallest of leaks in pipes of all diameters. We are certified to perform helium leak testing on a full range of metal and plastic materials.

Standard Helium Leak Testing with Every Weld

Axenics provides accurate leak testing services to each of our customers as a guarantee of the quality of our welds. Our goal is to provide peace of mind for our customers, so they can rest assured that our weldments will not leak, and that they will preform perfectly in their overall process. We make sure the integrity of our welds is up to your standards.

Benefits of Helium Leak Testing

Helium is among the lightest and smallest molecules, allowing it to quickly penetrate small leaks. The only smaller and lighter molecule is hydrogen; however, its flammable properties and tendency to be more expensive make helium the first choice for leak testing. In addition to being affordable and inflammable, helium is also non-toxic and non-reactive, which makes it very safe to use.

Leak Testing Process

Axenics uses a helium mass spectrometer to perform helium leak tests using one of two testing methods, depending upon the working conditions of the product being tested. Our experts have been trained to ensure that the results of the test are read accurately. Axenics has two helium leak testing units at our facility. Our machines are maintained to manufactures specifications on an annual basis, in addition to weekly and monthly inspections and frequent calibration, performed in-house by our expert technicians to ensure they are functioning accurately.

Vacuum Testing

When using the vacuum testing method, the helium leak detection unit will first create a vacuum in the product that is being tested. Once the welded area has been evacuated, the joints (or weldments) are sprayed with helium. If helium is detected on the outside of the product, the unit will alert you to the area of the leak.

Pressure Testing

When using the pressure testing method, the product is pressurized with helium or a mixture of helium and air or nitrogen. A sniffer probe is then used to scan potential leak sites inside the product, and will enable the user to locate any possible leaks.

Helium Leak Testing FAQs

Open All

What is helium leak testing?

Helium leak testing involves checking components for the smallest leaks with helium gas using either a vacuum testing method or a pressure testing method. Testing leaks in components, valves, manifolds, storage tanks and pipes is essential to prevent equipment failure, operational downtimes and potential workplace hazards.

When is helium leak testing used?

Helium leak testing is appropriate when you want to avoid component failures or malfunctions. There are a range of reasons that an OEM company will want to test their components. The top reason is to ensure the safety of your operations, workers and facilities as well as the environment if storage tanks will be holding or transporting chemicals.

Why is helium leak testing essential for vacuum or pressure systems?

Determining leaks is vital so operations can maintain a high level of productivity. Yet small leaks in assembly systems, such as gas delivery systems, can be overlooked due to their small size. Helium leak testing will detect these small leaks without negatively impacting the vacuum or pressure system and won’t leave behind any substances that can affect the system’s operations.

What is a helium mass spectrometer?

A helium mass spectrometer is the most effective way to detect leaks in components and products. It is sensitive enough to measure the leak rate and changes to helium gas in closed testing environments. The mass spectrometer consists of an ion source, ion trap and a separation system. When either the sealed chamber is filled with helium gas, or the component is filled with gas, the helium mass spectrometer measures flow rate changes.

What’s the difference between vacuum testing and pressure testing?

Vacuum testing involves pulling vacuum on the product. The helium mass spectrometer is used to measure the helium that is sprayed around each joint being tested. If there is a leak in the product allowing helium to enter (outside-in leak), the flow rate in the chamber changes and is detected by the mass spectrometer.

Pressure testing is when the product is pressurized with helium and placed into the testing chamber. The mass spectrometer can then detect if any helium enters the chamber from a leak in the vessel. This technique is referred to as “inside-out” leak testing.

Why is helium a good test gas?

Helium can be used to find the smallest of leaks without posing a threat to technicians who are testing the system. Non-toxic helium possesses the lightest and smallest molecules as it is an inert, nonflammable gas. Another benefit to using helium is that it is more easily detectable by measuring devices like mass spectrometers as it has good separation from other gases.