CAGE Code 6TL87 | DUNS 015210349
Select Page

Brazing Vs TIG Welding

by Last updated Jan 5, 2023 | Published on May 9, 2017Welding

Estimated Reading Time: 4 minutes

If you’re looking to form a permanent joint between two or more metals, there are a variety of ways to do so. However, brazing and welding services are the most common, and most reliable, choices available. While there are similarities of brazing vs TIG welding, there are key differences that differentiate the processes. Chief among them is this: welding involves the melting of two metals to join them, while the metals are not melted during the brazing process.

Welding (TIG Welding)

During welding, metal joints are created through the application of concentrated heat at the joint, which melts the metals, causing them to fuse together. There are several different types of welding that can be performed, depending on what the welder is trying to achieve. However, when we talk about welding services at Axenics, we are referring to the specific type of welding, known as TIG welding, or GTAW welding.

TIG welding is one of the best processes for making permanent joints between two materials, creating a stronger bond when compared with brazing.

Brazing

During brazing, the filler metal — which melts at a lower temperature than the base metal – is melted and directed  into the joint between the two metals. This occurs through a process referred to as capillary action. Because the filler metal melts at a lower temperature than the base metals, the base metals are not melted during this process. The cleanliness of the metals is extremely important in brazing, as there is less heat applied, and therefore contaminants are less likely to burn out during the process.

The following types of metals are commonly used as filler metals:

  • Copper
  • Copper-silver
  • Brass
  • Gold-silver
  • Silver
  • Nickel alloy
  • Aluminum-silicon

Don’t let tight fittings cramp your production. Find your solution in our welding guide.

Like welding, there are several different types of metal brazing that can be used, depending on the project, such as:

  • Torch brazing
  • Dip brazing
  • Furnace brazing
  • Infrared brazing
  • Salt-bath brazing
  • Induction brazing
  • Exothermal brazing
  • Resistance brazing

Torch Brazing

When we talk about brazing at Axenics, we are referring to the process called torch brazing. Manual torch brazing is often used in cases where the production volume is smaller, since it is done by hand, and therefore requires more labor and skill. Brazing can also be done with a machine, which reduces labor and skill requirements considerably. Finally, automatic torch brazing can be used for higher production volumes, as the manual labor requirements can almost be entirely eliminated.

Axenics has a deep knowledge of Gas Tungsten Arc Welding (GTAW), a.k.a. Tungsten Inert Gas or TIG Welding. Production challenges solved with welding. Get the free guide here.

Choosing Brazing vs TIG Welding

Brazing vs TIG welding – why use one process over the other? There are a variety of factors to consider when determining whether to use welding or brazing to join metals, some of which include:

  1. Assembly Size
    TIG welding is usually a better choice for projects where larger assemblies are being joined, as brazing works by applying heat to a broader area, which can make it more difficult for the heat to reach the right point of the filler metal.
  1. Thickness of Metals
    For thinner base metals brazing is typically the better option. However, when thicker base metals (.5 inches or more) are being joined, and you’re considering brazing vs TIG welding, either process can be used.
  1. Joint Shape
    For linear joints, brazing is often preferred over welding, as it typically involves less manual work than welding. For fusing spot joints, however, welding is the easier and more economical choice, which also results in a durable joint.
  1. Material Types
    When joining two different types of metals, brazing is often the better choice. It will often be more expensive and more complex to join different metal types through welding.
  1. Appearance
    If it matters how the materials look once they’ve been joined, then brazing is your best bet. Joining two metals through brazing typically produces a neat bead, vs. welding, which results in an irregular bead.

As you can see, there are many advantages to using each type of joining process, depending on your goals and the materials you’re working with. Axenics is happy to help you discuss brazing vs TIG welding services for your project, based on your needs and your budget.

Demand top-quality, precision welding from your manufacturing partner

Learn more in our welding asset.

Download Now

Related Posts

Contract welding

Contract welding

Contract welding entails a manufacturer hiring an outside partner to produce welds on components or welds on final products based on the hiring manufacturer’s design and specifications.

Precision welding

Precision welding

Precision welding, such as TIG welding, produces clean and exceptionally accurate welds. Precision welds are defined as the purest welds for joining tubes and fittings on both metals and plastics. A precision weld’s bead fully penetrates the inner wall of a tube,...

Skip to content